Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
hdmi_mode [2016/10/06 17:22]
admin 		hdmi_mode [2016/10/06 17:23] (current)
admin [Manual configuration:]
Line 42: Line 42:
   hdmi_group=2   hdmi_group=2
   hdmi_mode=4   hdmi_mode=4
-  + 
 +All modes are on: [[http://elinux.org/RPiconfig]]\\ 
 If nothing helps set the HDMI save mode to try to boot with maximum hdmi compatibility. This is the same as the combination of: hdmi_force_hotplug=1, hdmi_ignore_edid=0xa5000080, config_hdmi_boost=4, hdmi_group=2, hdmi_mode=4, disable_overscan=0, overscan_left=24, overscan_right=24, overscan_top=24, overscan_bottom=24 If nothing helps set the HDMI save mode to try to boot with maximum hdmi compatibility. This is the same as the combination of: hdmi_force_hotplug=1, hdmi_ignore_edid=0xa5000080, config_hdmi_boost=4, hdmi_group=2, hdmi_mode=4, disable_overscan=0, overscan_left=24, overscan_right=24, overscan_top=24, overscan_bottom=24
   hdmi_safe=1   hdmi_safe=1
Line 48: Line 50:
 and reboot: and reboot:
   $ sudo reboot   $ sudo reboot
-   + 
-  ----+----