Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
ip_and_network [2016/06/23 20:19]
admin [Login over SSH]
ip_and_network [2019/02/17 19:21] (current)
admin [Static IP Address]
Line 16: Line 16:
 Give the Raspberry Pi a static IP address. Open the interfaces file: Give the Raspberry Pi a static IP address. Open the interfaces file:
   $ sudo nano /​etc/​network/​interfaces   $ sudo nano /​etc/​network/​interfaces
-Add these lines after "​face ​eth0 inet dhcp": +Add these lines
- +    # Ethernet 
-     ​auto eth0:1 +    iface eth0 inet dhcp 
-     ​iface eth0:1 inet static +    ​allow-hotplug eth0 
-       ​address 192.168.0.199 +    auto eth0:1 
-       ​netmask 255.255.255.0 +    iface eth0:1 inet static 
-       ​gateway 192.168.0.1+      address 192.168.0.199 
 +      netmask 255.255.255.0 
 +      ​gateway 192.168.0.1 
 +Or:       ​ 
 +    # Ethernet 
 +    allow-hotplug eth0 
 +    iface eth0 inet static 
 +      address 192.168.0.199 
 +      netmask 255.255.255.0 
 +      ​gateway 192.168.0.1 
 +      dns-nameservers 192.168.0.1 
 +      ​
 Save and quit, ctl+o, Return, ctl+x.\\ Save and quit, ctl+o, Return, ctl+x.\\
  
Line 47: Line 58:
   $ ssh -XY pi@192.168.0.111   $ ssh -XY pi@192.168.0.111
 PW: raspberry\\ PW: raspberry\\
-Or install an VPN server:\\ +Or install an VNC server: [[vnc|VNC]] 
-[[vnc|VNC]]+ 
 +---- 
 + 
 +==== Miscellaneous ==== 
 +If the host key verification failed, one can remove the old key with:\\ 
 +  $ ssh-keygen -R 192.168.0.123 
 +And with\\ 
 +  ~. 
 +one can terminate a broken ssh session.
  
 +----