Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
ip_and_network [2016/06/23 20:12]
admin [Static IP Address]
ip_and_network [2019/02/17 19:21] (current)
admin [Static IP Address]
Line 16: Line 16:
 Give the Raspberry Pi a static IP address. Open the interfaces file: Give the Raspberry Pi a static IP address. Open the interfaces file:
   $ sudo nano /​etc/​network/​interfaces   $ sudo nano /​etc/​network/​interfaces
-Add these lines after "​face ​eth0 inet dhcp":+Add these lines
 +    # Ethernet 
 +    iface eth0 inet dhcp 
 +    allow-hotplug eth0 
 +    auto eth0:
 +    iface eth0:1 inet static 
 +      address 192.168.0.199 
 +      netmask 255.255.255.0 
 +      gateway 192.168.0.1 
 +Or:        
 +    # Ethernet 
 +    allow-hotplug eth0 
 +    iface eth0 inet static 
 +      address 192.168.0.199 
 +      netmask 255.255.255.0 
 +      gateway 192.168.0.1 
 +      dns-nameservers 192.168.0.1 
 +       
 +Save and quit, ctl+o, Return, ctl+x.\\
  
-     auto eth0:1 +Disable the DHCP-Client:\\      
-     iface eth0:1 inet static +In Raspbian Wheezy
-       address 192.168.0.199 +  $ sudo service dhcpcd stop 
-       netmask 255.255.255.0 +  $ sudo update-rc.d -f dhcpcd remove 
-       gateway 192.168.0.1+ 
 +In Raspbian Jessie: 
 +  $ sudo service dhcpcd stop 
 +  $ sudo systemctl disable dhcpcd ​      ​
                
-Restart ethernet+Restart ethernet:
   $ sudo ifdown eth0:1   $ sudo ifdown eth0:1
   $ sudo ifup eth0:1   $ sudo ifup eth0:1
 +   
 +Or/and reboot: 
 +  $ sudo reboot 
 +  ​
 ==== Login over SSH ==== ==== Login over SSH ====
-One can login with: +One can login from your computer ​with: 
-  $ ssh pi@192.168.0.111 +  $ ssh pi@192.168.0.199 
-or with XWindows ​ support:+or with XWindows support:
   $ ssh -XY pi@192.168.0.111   $ ssh -XY pi@192.168.0.111
 PW: raspberry\\ PW: raspberry\\
 +Or install an VNC server: [[vnc|VNC]]
 +
 +----
 +
 +==== Miscellaneous ====
 +If the host key verification failed, one can remove the old key with:\\
 +  $ ssh-keygen -R 192.168.0.123
 +And with\\
 +  ~.
 +one can terminate a broken ssh session.
  
 +----