Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
image_modifikations [2016/01/28 16:30]
admin [Script]
image_modifikations [2016/01/28 16:45] (current)
admin [Arduino]
Line 1: Line 1:
 ===== Embedded Artist Image Modifications for Raspbian Wheezy ===== ===== Embedded Artist Image Modifications for Raspbian Wheezy =====
  
-These modifications work with the Raspberry Pi B+, too.+These modifications work with the Raspberry Pi B and B+.
 Download and burn the Raspbian Wheezy 2014-09-09 Image:\\ Download and burn the Raspbian Wheezy 2014-09-09 Image:\\
 [[https://www.raspberrypi.org/downloads/raspbian/]]\\ [[https://www.raspberrypi.org/downloads/raspbian/]]\\
Line 68: Line 68:
    printf "start shutdown aund reset button on GPIO 22\n"    printf "start shutdown aund reset button on GPIO 22\n"
    /home/pi/paper-duino-pi/shutdownbutton_02.py &    /home/pi/paper-duino-pi/shutdownbutton_02.py &
 +   # start blinking
    printf "start blinking on GPIO 27\n"    printf "start blinking on GPIO 27\n"
    /home/pi/paper-duino-pi/blink_02.py &    /home/pi/paper-duino-pi/blink_02.py &
Line 86: Line 87:
  
 2. For the modification of the GPIO Pin and the Avrdude, the easiest way is to download the setup for the AlaMode board: 2. For the modification of the GPIO Pin and the Avrdude, the easiest way is to download the setup for the AlaMode board:
-  $ wget http://dernulleffekt.de/programme/paper-duino-pi-setup.tar.gz +  $ wget http://dernulleffekt.de/programme/paper-duino-pi-setup_02.tar.gz 
-<del>[[http://www.wyolum.com/downloads/alamode-setup.tar.gz]]</del>\\+<del>[[http://git.io/alamode-setup]]</del>\\
 unpack it, unpack it,
   $ sudo tar xf paper-duino-pi-setup.tar.gz   $ sudo tar xf paper-duino-pi-setup.tar.gz