Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
embedded_art_system [2017/09/02 19:40]
admin [WLAN] 		embedded_art_system [2017/09/13 18:08] (current)
admin [Miscellaneous]
Line 8: Line 8:
  
 ---- ----
-==== Raspberry Pi Image ====+==== Embedded Artist Image ====
 How to make an Embedded Artist Image ...\\ How to make an Embedded Artist Image ...\\
 ... based on Raspbian Wheezy 2014-09-09:\\ ... based on Raspbian Wheezy 2014-09-09:\\
Line 17: Line 17:
 [[https://www.raspberrypi.org/downloads/raspbian/]]\\ [[https://www.raspberrypi.org/downloads/raspbian/]]\\
  
----- +=== Program ===
-==== Program ====+
 All the code one need for the EAS:\\ All the code one need for the EAS:\\
 [[Program]] [[Program]]
  
----- +=== Directories ===
-==== Directories ====+
 [[Directories]] [[Directories]]
  
----- +=== OSC Protocol ===
-==== OSC Protocol ====+
 [[OSC communication protocol]] [[OSC communication protocol]]
  
----- +=== Duino-Pi Protokol ===
-==== Duino-Pi Protokol ====+
 [[Duino-Pi Protokol]] [[Duino-Pi Protokol]]
  
Line 83: Line 79:
 ---- ----
 ==== WLAN ==== ==== WLAN ====
-[[https://linuxundich.de/raspberry-pi/drei-wege-das-wlan-auf-einem-raspberry-pi-einzurichten/]]\\+[[wireless|WLAN]]\\
  
-update +---- 
-  $ sudo apt update +==== Py Live Cam ==== 
-  $ sudo apt full-upgrade +Setup for a Raspberry Pi live camera with Python.\\ 
-  $ sudo reboot +[[live_cam|Py Live Cam]] 
-find the wireless adapter + 
-  $ iwlist scan +---- 
-  wlan0     No scan results +==== Web Cam ==== 
-  lo        Interface doesn't support scanning. +[[webcam|Web Cam]]
-  eth0      Interface doesn't support scanning. +
-scan for networks +
-  $ sudo iwlist wlan0 scan | egrep "(ESSID|IEEE)" +
-    ESSID:"mywireless" +
-    IE: IEEE 802.11i/WPA2 Version 1 +
-    ESSID:"theothernetwork" +
-    IE: IEEE 802.11i/WPA2 Version 1 +
-open +
-  $ sudo nano /etc/wpa_supplicant/wpa_supplicant.conf +
-change +
-  network={ +
-    ssid="mywireless" +
-    psk="password" +
-  } +
-restart the wireless adapter +
-  $ sudo ifdown wlan0 +
-  $ sudo ifup wlan0+
  
 ---- ----
 ==== Miscellaneous ==== ==== Miscellaneous ====
 [[GitHub Manual]]\\ [[GitHub Manual]]\\
-[[Change User]]\\ +[[change_user|Change the User]]\\ 
-[[Stop Blanking]]\\+[[stop_blanking|Blanking]]\\
 [[Recover the Password]]\\ [[Recover the Password]]\\