Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
duino-pi_protokol [2014/10/26 21:04]
admin
duino-pi_protokol [2014/11/10 02:17]
admin
Line 3: Line 3:
 ---- ----
  
-CharacterNumberCharacterNumber, ....+The signal beginns with 4 diffrent characters (S,M,A,D) for stepper motorgear motors, analog- and digital output and the number of the deviceFollowed by an other character for the attribut and the value.
  
-Servo:\\+Duino-Pi Code:\\ 
 +[[https://github.com/dernulleffekt/embedded-artist]] 
 + 
 +structure:\\ 
 +character, number, character, number, .... return ("\n")\\ 
 + 
 + 
 +**Servo:**\\
 S = servo + number (1,2,3,...)\\ S = servo + number (1,2,3,...)\\
 P = position + angle (0 - 180)\\ P = position + angle (0 - 180)\\
-Example: S2P180 (Servo: 2, Possition: 180)\\+Example: S2P180 (servo: 2, possition = 180)\\
  
-Motor:+**Motor:**\\
 M = motor + number (1,2,3,...)\\ M = motor + number (1,2,3,...)\\
 +D = direction + number (0,1) (0 = clockwise, 1 = counterclockwise)\\
 S = speed + number (0-255) \\ S = speed + number (0-255) \\
-Example: M1S150 (Motor: 1, Speed: 150)+Example: M1D0S150 (motor: 1, directionclockwise, speed = 150)\\ 
 + 
 +**Analog**\\ 
 +A = analog + number (1,2,3,...)\\ 
 +V = value + number (0 - 255)\\ 
 +Example: A4V0 (analog: 4, value = 0)\\ 
 + 
 +**Digital**\\ 
 +D = digital + number (1,2,3,...)\\ 
 +S = value + number (0,1)\\ 
 +or\\ 
 +F = flash + number 1\\ 
 +Example: D2S1 (digital: 2, on)\\ 
 +         D1F1 (digital: 1, flash)\\
  
-analog +**Preset**\\ 
-digital+P = preset + number(1,2,3,...)\\ 
 +Preset 0 turn off everything\\ 
 +Preset 1 turn on everything\\